Lutron RRK-R6ANS-240 RA2 Select In-Line Switc

The RA2 Select family of in-line dimmers,
switches and fan controls can control lighting,
motor, and fan loads both locally and remotely
when paired with Pico wireless controls or Radio
Powr Savr occupancy / vacancy sensors. This
provides a system that is convenient and easy to
install.
RA2 Select in-line load controls use Lutron
patented Clear Connect RF technology which
provides reliable, wireless communication with
other RA2 Select devices. Each load control can
be controlled individually using a Pico wireless
control. Using a RA2 Select main repeater allows
devices to be part of a whole house solution that
can be controlled remotely from anywhere in the
world

Main Features:

The reverse-phase dimmer is trailing-edge
capable of up to 250 W of
incandescent/halogen/ELV loads and up to
1 A/150 W of LED.
• The switch is rated for 6 AX of general purpose
lighting load and 2 A/0.5 HP of motor load.
• The four-speed fan control is rated for a single
AC ceiling fan up to 100 W.*
• When powered on in an unaddressed state (not
paired with a Pico remote control or activated in
a system), the fan control will turn on the fan for
two (2) minutes to allow the installer to verify that
the device is installed and wired correctly.
• The four fan speed settings (low, medium,
medium high, and high) can be adjusted to be
faster or slower to optimize each for the specific
ceiling fan that is being used. This feature is
accessible in the device settings withinin the
Lutron app.
• Allows remote control from anywhere in the
space when paired with Pico wireless controls.
• When used with the RA2 Select main repeater,
the load controls can be programmed via the
Lutron App to incorporate lighting scenes and
schedule daily events. Also, the load controls
can be controlled from anywhere in the world