Kidde KF20LL Interconnectable Optical Smoke Alarm with Long-Life Back-up Battery
Original price
£34.00
-
Original price
£34.00
Original price
£34.00 inc VAT £28.33 exc VAT
£34.00
-
£34.00
Current price
£34.00 inc VAT £28.33 exc VAT
inc VAT £28.33 exc VAT
| /
Estimated delivery time: Next working day
Description
Main Features:
- Interlink with up to 23 Firex hard-wired alarms
- Alarm memory
- Dust compensation and bug screen
- Auto reset after activation
- Tamper-resistant locking device
- Mains operation – 9V Lithium back-up battery supplied
Specification
- Power Supply 230V mains-powered with 9V Alkailine battery back-up
- Temperature Range 0ºC to + 40ºC
- Humidity Range Up to 93% Relative Humidity (RH) non-condensing
- Storage and Transport -20ºC to +60ºC and 5–95% relative humidity (RH) non-condensing
- Warranty 6 years
- Approvals BSI certified to BS EN14604:2005
- CE tested and certified Sensor Optical, circular lateral chamber with insect-resistant width slot entry portals and added bug screen mesh
- Chamber Size 35mm outside diameter x 16mm depth approximate (external)
- Detection Band Infrared light wavelength
- Button Test Simulates the effect of smoke within the sensing chamber, checks electronics and sounder
- Automatic Self-test Circuitry is tested and unit beeps (chirps) if fault is detected
- Supply Voltage 230V AC, 50 Hz (nominal UK voltage)
- Power Consumption < 15mA
- Connection Push-in/snap-fit type connector with 150mm long flying leads (supplied)
- Battery Back-up User-replaceable alkaline 9V battery (522/6LR61)
- Power-on Indicator Continuous green LED
- Alarm Sounder Electronic piezo-electric sounder (T3 pattern sound - 3 pulses - space - 3 pulses), soldered contacts
- Sound Output 85dB (A) minimum at 3 metres
- Alarm Frequency 3.2 kHz typical
- Dust Protection In-built foam gasket in rear of alarm to prevent dust ingress into rear of the alarm
- Alarm Status Red LED flashes approx once every five minutes = normal operation
- Red LED flashes once a second = sensing smoke (sounder alarm sounds)
- Red LED flashes once every ten seconds = in hush condition (auto-reset after 15 minutes)
- Interconnection Up to 24 Firex and Kidde ‘Slick’ units (smoke, heat and CO) can be hardwire interconnected with optional control (see below)
- Optional Controls Wired Remote Test and Hush Unit (REMTH) allows test and hush of interlinked units
- Optional Pattresses SMK23RU also has integral switchable relay for operating remote devices
- SMK4896 – Surface mounting base for added ease of installation
- Fixing Mounting bracket ring supplied with two ‘T’ slot fitting option
- 57mm spacing to a maximum of 90mm for standard screw fittings on back boxes
- Bracket has 50mm diameter central access hole for cabling
- Plastics used NORYL – Cover, main body and mounting bracket
- Lead-Free Status All Firex alarms are lead-free
Product Dimensions
- Alarm Dimensions 127 x 127 x 39mm
- Bracket Dimensions 133 x 133 x 6mm